產品展示PRODUCTS
混凝土抗?jié)B儀
更新時間：2025-07-30
訪問量：1917
廠商性質：生產廠家
生產地址：
| HS－4型混凝土抗?jié)B儀 本儀器適用于混凝土抗?jié)B性能的試驗的抗?jié)B標號的測定，同時可用于其它建筑材料透氣測定和質量檢測。主模采用優質鋼，臺面采用不銹鋼板。 主要技術參數： 1、抗?jié)B儀zui大壓力：5Mpa 2、水泵柱塞直徑12，行程10（mm） 3、工作方式：電動手動兩用 4、外型尺寸：1100×900×600mm |
| HCZT-1型程控磁盤振動臺 本儀器實驗室內震實成型混凝土試件及制品之用。 主要技術參數： | ||
| ZH.DG—80型混凝土磁力振動臺 主要用于試驗室內混凝土抗壓試塊振實成型。 主要技術參數： （1） 臺面尺寸：800X600mm （1） 振幅（全幅）：0.5mm （2） 振動頻率：50HZ （3） 每次成型試件數量：1503，試模6個1003，三聯試模3條 （4） 凈重：約240kg | ||
| SjD—60型強制式單臥軸混凝土攪拌機 本機適用于建筑科研不口建筑公司及混凝土構件單位試驗室，可攪拌普通 混凝土和輕質混凝土，也可用到其它行業試驗室對不同物料進行攪拌。 主要技術參數： （1） 進料容量：96升 （2） 出料容量：60升 （3） zui大出料容量：66升 （4） 攪拌均勻時間：≤45秒 （5） 攪拌軸轉速：45轉／分 （6） 電動機功率：2.2千瓦 （7） 電源電壓：380伏 （8） 外形尺寸：1520X 530X1060mm | ||
| UJZ-15型砂漿攪拌機 用于建筑工程、大專院校、科研質檢部門等作墻體粉面材料及磚砌墻用砂漿強度試驗的攪拌機，也適用于人造大理石廠家面料及其它粉末狀材料的作業。 主要技術參數： 1、攪拌葉轉速（順時）80±4r/min 2、攪拌筒轉速（逆時）60±2r/min 3、攪拌筒容量：15L 4、 攪拌筒內徑：380x250mm | ||
| HVC-1型混凝土拌合物維勃稠度儀 本儀器是測定砼拌合物的維勃稠度值。用于評定混凝土拌合物坍落度在10mm內的混凝土，骨料zui大粒徑40mm。符合GBJ80-85的國家標準。 主要技術參數： 震動頻率:50±3Hz 電機：0.25千瓦380V 空載振幅：0.5±0.1m | ||
| HJ-84型混凝土快速養護箱 本儀器適用于施工現場，預制構件科研等單位作混凝土快速養護，它可通過不同加速養護法預測出7天、28天令期砼抗壓，抗折強度，是砼質量控制*的設備。 主要技術參數： 1、箱內尺寸：800×580×400mm 2、工作壓力：380V 3、電熱功率：單組3Kw 計3×3Kw 4、控溫范圍：10－100℃ 5、可放試模：150×150 2組 100×100 3組 | ||
| HC-7L砼含氣量測定儀 本儀器適用于集料粒徑不大于40mm，含氣量不大于10％有塌落度的混凝土拌和物中的含氣量，符合交通部發布94－07－05＜公路工程水泥混凝土試驗規程＞（JTJ053－94）的全部規定，該測定方法符合GBJ80－85標準。 | ||
HS - 4 type concrete impervious instrument
The instrument applies to concrete impermeable performance test of the anti-permeability label measurement, and at the same time, can be used for other construction materials permeability measurement and quality detection. The main mold is made of high quality steel, mesa is made of stainless steel plate.
Main technical parameters:
1, impervious instrument maximum pressure: 5 mpa
2, pump plunger diameter 12, stroke 10 （mm）
3, work style: electric manual combination
4, outlook size: 1100 x 900 x 600 mm
HCZT - 1 type SPC disk vibration table
The instrument for laboratory vibrated forming concrete specimen and the use of products.
Main technical parameters:
1. Mesa dimension: 1 m2 0.8 m2 0.5 m2
2. Vibration frequency: 2860 times/min.
3. Vibration amplitude: 3-0.6 mm
4. Motor power: 1.5 KW 380 v
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ZH. DG - 80 type concrete magnetic vibration table
Mainly used for test indoor concrete compressive block vibrated forming.
Main technical parameters:
（1） mesa size: 800 x600mm
（1） amplitude （full width） : 0.5 mm
（2） vibration frequency: 50 hz
（3） every time molding sample quantity: 1503, try die 6 1003, triple test mode 3
（4） the net weight: about 240 kg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SjD - 60 type force single lie shaft concrete mixer
The machine is suitable for building research don't mouth construction company and concrete member unit laboratory, can stir ordinary
Concrete and lightweight concrete, can also be used to other industries laboratory for different material mixing.
Main technical parameters:
（1） feed capacity: 96 liters
（2） the discharging capacity: 60 litres
（3） the maximum discharge capacity: 66 liters
（4） stir well time: 45 seconds or less
（5） the stirring shaft speed: 45 RPM
（6） motor power: 2.2 kw
（7） power supply voltage: 380 v
（8） physical size: 1520 x 530 x1060mm
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
UJZ - 15 type mortar mixer
Used in construction engineering, universities and colleges, scientific research quality inspection department, wall powder surface material and brick wall with mortar strength test of the mixer, and can also be applied to artificial marble manufacturer fabrics and other powder material of homework.
Main technical parameters:
1, mixing blade speed （on time） 80 + 4 r/min
2, mixing drum speed （inverse） 60 ± 2 r/min
3, mixing drum capacity: 15 l
4, mixing barrel bore: 380 x250mm
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HVC - 1 type concrete batch d Bob consistency instrument
This instrument is determination concrete batch dimension of Bob consistency value. Used to assess concrete batch slump in 10 mm in concrete, the largest aggregate size 40 mm. Conform to the GBJ80-85 national standard.
Main technical parameters:
Vibration frequency: 50 ± 3 hz
Motor: 0.25 kw 380 v
Light amplitude: 0.5 + / - 0.1 m
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HJ - 84 type concrete fast curing box
The instrument is suitable for construction site, prefabricated scientific research units for concrete rapid curing, it can be through the different accelerating curing method predict 7 days, 28 days make period concrete compressive and flexural strength, is the concrete quality control indispensable special equipment.
Main technical parameters:
1, the size: 800 x 580 x 400 mm
2, working pressure: 380 v
3, electric power: unit 3 kw meter 3 by 3 kw
4, temperature control range: 10-100 ℃
5, can be put on trial mode: 150 x 150 2 group 100 x 100 three groups
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HC - 7 l concrete air meter
The instrument applies to aggregate size is not more than 40 mm, gas content is not more than 10% have slump concrete mixing content of gas content, in line with the ministry of communications issued the 94-07-05 < highway engineering cement concrete test code > （JTJ053-94） all of the provisions, this determination method accord with GBJ80-85 standard.
Asphalt test instrument geotechnical pavement test instrument concrete cement instrument waterproofing materials test instrument engineering plastic mold products are: curing box, mark a box, concrete permeameter, concrete drilling core machine, concrete since falling mixer, cement electric bending machine, planetary cement sand mixer, the products are widely used in colleges and universities, railway, bridge tunnel, petrochemical industry, water conservancy construction, national defense, etc. In the production and sales of independent of products at the same time, our factory and domestic and international famous factory
